{"title":"BBCG.19.D365 Configuring Asset Management","description":"\u003cp\u003eThe Asset Management module within Dynamics 365 allows you to manage the full life cycle of your enterprise assets including the acquisition, the management, the location, and also all of the work orders that have been performed against the asset.  This module fills in the management of the asset that the Fixed Asset module does not track.\u003c\/p\u003e\n\u003cp\u003eSetting up the Asset Management details are not hard either and this guide is designed to give you step by step instructions to show you how to set up the Asset management area, and also show you how most of the base components of the module work so that you can get you up and running and tracking enterprise assets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring the Asset Types\u003c\/li\u003e\n\u003cli\u003eConfiguring Functional Locations\u003c\/li\u003e\n\u003cli\u003eConfiguring Service Levels\u003c\/li\u003e\n\u003cli\u003eConfiguring Assets\u003c\/li\u003e\n\u003cli\u003eConfiguring Maintenance Requests\u003c\/li\u003e\n\u003cli\u003eConfiguring Work Orders\u003c\/li\u003e\n\u003cli\u003eConfiguring Faults\u003c\/li\u003e\n\u003cli\u003eConfiguring Work Order Projects\u003c\/li\u003e\n\u003cli\u003eConfiguring Jobs\u003c\/li\u003e\n\u003cli\u003eConfiguring Workers\u003c\/li\u003e\n\u003cli\u003eConfiguring Asset Management Parameters\u003c\/li\u003e\n\u003cli\u003eProcessing Maintenance Requests\u003c\/li\u003e\n\u003cli\u003eProcessing Work Orders\u003c\/li\u003e\n\u003cli\u003eConfiguring Preventive Schedules\u003c\/li\u003e\n\u003cli\u003eConfiguring Rounds\u003c\/li\u003e\n\u003cli\u003eConfiguring Work Order Scheduling\u003c\/li\u003e\n\u003cli\u003eScheduling Work Orders\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"bbcg-19-01-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-1-configuring-asset-types","title":"BBCG.19.01.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 1: Configuring Asset Types (Digital)","description":"\u003cp\u003eThe first thing that we will do within the Asset management module is to set up some of the coding that we will use to define all the assets.\u003c\/p\u003e\n\u003cp\u003eIn this module we will start setting up the Asset types that we will use to group all our assets together, and this will also include the creation of some lifecycle setup for the Assets themselves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Asset Lifecycle States\u003c\/li\u003e\n\u003cli\u003eConfiguring Asset Lifecycle Models\u003c\/li\u003e\n\u003cli\u003eConfiguring Allowed Lifecycle States\u003c\/li\u003e\n\u003cli\u003eConfiguring Asset Types\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 100 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299291742341,"sku":"BBCG.19.01.D365.1.PDF","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_a886734c-015a-4159-a7a4-3265d4e8bbe2.png?v=1575548634"},{"product_id":"bbcg-19-01-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-2-configuring-functional-locations-digital","title":"BBCG.19.02.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 2: Configuring Functional Locations (Digital)","description":"\u003cp\u003eFunctional locations within Asset management are used to track the possible locations that assets may be stored or installed at. \u003c\/p\u003e\n\u003cp\u003eFunctional locations could contain other functional locations as well, for example, a plant could contain multiple production areas, that could then contain multiple production lines where assets could be stored.\u003c\/p\u003e\n\u003cp\u003eFunctional locations can also be storage areas like a maintenance area where we are just storing assets that are not actively being used by the system.\u003c\/p\u003e\n\u003cp\u003eIn this module we will step through the process of creating functional locations within Asset Management and show you the setup that is required to effectively manage the lifecycle of the functional locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Functional Location Lifecycle States\u003c\/li\u003e\n\u003cli\u003eConfiguring Functional Location Lifecycle Models\u003c\/li\u003e\n\u003cli\u003eConfiguring Functional Location Lifecycle State Updates\u003c\/li\u003e\n\u003cli\u003eConfiguring Functional Location Types\u003c\/li\u003e\n\u003cli\u003eConfiguring Functional Locations\u003c\/li\u003e\n\u003cli\u003eActivating Functional Locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 180 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299298295941,"sku":"BBCG.19.02.D365.1.PDF","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_6cbbd641-6c41-4bff-a104-83976b20d15b.png?v=1575549179"},{"product_id":"bbcg-19-03-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-3-configuring-service-levels-digital","title":"BBCG.19.03.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 3: Configuring Service Levels (Digital)","description":"\u003cp\u003eService levels within Asset Management allow us to define the acceptable time that we expect work orders to be started and completed for based on function locations, asset types and assets.\u003c\/p\u003e\n\u003cp\u003eService levels need to be configured in the system before we can create any work orders within the system, so we will want to configure them before we move on.\u003c\/p\u003e\n\u003cp\u003eIn this module we will show you the steps required to configure some simple service levels, and also configure the default service levels by asset type and functional location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Work Order Service Levels\u003c\/li\u003e\n\u003cli\u003eConfiguring Asset Service Levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 68 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299303112837,"sku":"BBCG.19.03.D365.1.PDF","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_65c7fed8-4068-41ae-a8d0-d639ee123905.png?v=1575549432"},{"product_id":"bbcg-19-04-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-4-configuring-assets-digital","title":"BBCG.19.04.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 4: Configuring Assets (Digital)","description":"\u003cp\u003eAssets within Asset management allow us to track all the different things that we maintain within the organization.  Assets can be very granular, like a pipe, or a valve, or they can be parent assets that are made up of multiple sub assets, like a piece of machinery, or even a plant.\u003c\/p\u003e\n\u003cp\u003eIn order to maintain assets, we need to configure them within the system.\u003c\/p\u003e\n\u003cp\u003eIn this module we will step through the process or creating assets and activating them so that we can use them within Asset management.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCreating New Assets\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eActivating Assets\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalling Assets at Functional Locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 54 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299306225797,"sku":"BBCG.19.04.D365.1.PDF","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_93cd2c64-8fbe-4ade-bbab-a2e7aa11061c.png?v=1575549642"},{"product_id":"bbcg-19-05-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-5-configuring-maintenance-requests-digital","title":"BBCG.19.05.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 5: Configuring Maintenance Requests (Digital)","description":"\u003cp\u003eMaintenance requests are usually the first step in our maintenance work order process within Asset management and allow is to create an initial request that will move through the maintenance request lifecycle.\u003c\/p\u003e\n\u003cp\u003eFrom the maintenance requests, we will probably create work orders that can be dispatched and scheduled.\u003c\/p\u003e\n\u003cp\u003eIn order to create \u003cstrong\u003eMaintenance requests\u003c\/strong\u003e there is a little bit of setup and configuration required.\u003c\/p\u003e\n\u003cp\u003eIn this module we will step through the setup and configuration that we need to do in order to get Asset management ready to process maintenance requests.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Maintenance Request Lifecycle States\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Maintenance Request Lifecycle Models\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCreating a Depot Lifecycle Status Model\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Maintenance Request Lifecycle States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 97 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299308716165,"sku":"BBCG.19.05.D365.1.PDF","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_7709f0c5-f314-40fc-9073-b8cb267c2889.png?v=1575549853"},{"product_id":"bbcg-19-06-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-6-configuring-work-orders-digital","title":"BBCG.19.06.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 6: Configuring Work Orders (Digital)","description":"\u003cp\u003eBefore we can create work orders within Asset management, we need to set up some controls within the system, including the lifecycle models and the valid states for our work orders.\u003c\/p\u003e\n\u003cp\u003eIn this module we will show you how to configure these controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Work Order Lifecycle States\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Work Order Lifecycle Models\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfigure Work Order Lifecycle Model States\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Work Order Types\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 128 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299312648325,"sku":"BBCG.19.06.D365.1.PDF","price":7.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_866c5fad-bebe-46d8-838f-08b95f0610e4.png?v=1575550089"},{"product_id":"bbcg-19-07-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-7-configuring-faults-digital","title":"BBCG.19.07.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 7: Configuring Faults (Digital)","description":"\u003cp\u003eThe fault reporting capabilities within Dynamics 365 Asset Management allow the workers to report the faults, symptoms, causes and remedies for the Maintenance requests and work orders.  It allows the user to start gathering information about the maintenance issues and over time will provide a knowledge base of possible fault reports and remedies for the workers.\u003c\/p\u003e\n\u003cp\u003eIn this module we will show how to set up the fault reporting controls that we will use for the maintenance requests and work orders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Fault Areas\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Fault Symptoms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfigure Fault Causes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Fault Remedies\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Fault Designer Defaults\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 176 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299316088965,"sku":"BBCG.19.07.D365.1.PDF","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_d4c6eace-fcb5-4983-8209-e9d8603072db.png?v=1575550285"},{"product_id":"bbcg-19-08-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-8-configuring-asset-management-projects-digital","title":"BBCG.19.08.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 8: Configuring Asset Management Projects (Digital)","description":"\u003cp\u003eThe work orders within Asset management link back to the project management and accounting module within Dynamics 365 and the project area is uses to capture all the costs and activities performed by the asset management work orders.\u003c\/p\u003e\n\u003cp\u003eAs a result, there is a little bit of setup that needs to be performed within the project management and accounting area that need to be linked with the Asset management controls before we can create work orders.\u003c\/p\u003e\n\u003cp\u003eIn this module we will walk through the different steps that you need to perform in order to get the projects correctly configured for asset management.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Asset Management Shared Categories\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Project Category Groups\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Asset Management Project Categories\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Asset Management Project Groups\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Asset Management Projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 118 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299327885445,"sku":"BBCG.19.08.D365.1.PDF","price":7.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_fa66d250-981e-403e-9c64-c90012088c55.png?v=1575550860"},{"product_id":"bbcg-19-09-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-9-configuring-jobs-digital","title":"BBCG.19.09.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 9: Configuring Jobs (Digital)","description":"\u003cp\u003eThe next area that we will want to configure will be the asset management job details.  This includes Job categories, job types, and job variants.\u003c\/p\u003e\n\u003cp\u003eIn this module, we will show you how to configure some of the common codes and controls for tracking jobs within Asset management.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Maintenance Job Type Categories\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Maintenance Job Trades\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Maintenance Job Type Variants\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 75 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299332669573,"sku":"BBCG.19.09.D365.1.PDF","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_7c81d63b-50c1-4447-bd03-aa86103c68c7.png?v=1575551104"},{"product_id":"bbcg-19-10-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-10-configuring-workers-digital","title":"BBCG.19.10.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 10: Configuring Workers (Digital)","description":"\u003cp\u003eIn order to assign and schedule work orders, we need to have someone that can do the jobs for us, and in order to do that we need to set up our maintenance workers within Asset management.\u003c\/p\u003e\n\u003cp\u003eIn this module we will show you how you can create your workers, and group them together into worker groups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring Maintenance Worker Groups\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfigure Maintenance Workers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring Worker Periods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 59 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299336175749,"sku":"BBCG.19.10.D365.1.PDF","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_b507ffce-862a-476c-976d-1ec70652c3b4.png?v=1575551344"},{"product_id":"bbcg-19-11-d365-1-pdf-configuring-asset-management-within-dynamics-365-supply-chain-management-module-11-configuring-the-asset-management-parameters-and-controls-digital","title":"BBCG.19.11.D365.1.PDF Configuring Asset Management within Dynamics 365 Supply Chain Management - Module 11: Configuring the Asset Management Parameters and Controls (Digital)","description":"\u003cp\u003eBefore we can perform a lot of the transactions within \u003cstrong\u003eDynamics 365 Asset Management,\u003c\/strong\u003e we will need to configure some of the parameters and controls within the system.  These controls will default in a lot of the information for us as we are creating the transactions in the system and will also make sure that everything runs smoothly.\u003c\/p\u003e\n\u003cp\u003eIn this module we will show you all the setups that you will want to perform for the parameters and controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTopics Covered\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguring the Asset Management Parameters\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguring the Asset Management Number Sequences\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eViewing the Asset Management Number Sequences\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDynamics Companions Bare Bones Configuration Guides\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfiguring Asset Management within Dynamics 365 Supply Chain Management\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePDF:\u003c\/b\u003e 42 pages\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (December 5, 2019)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/p\u003e","brand":"Murray Fife","offers":[{"title":"Default Title","offer_id":31299339255941,"sku":"BBCG.19.11.D365.1.PDF","price":2.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/products\/Digital_bfcaa172-19d2-465a-a4e7-1ab868976a69.png?v=1575551773"},{"product_id":"bbcg-19-d365-5-pdf-configuring-asset-management-within-dynamics-365-erp-fifth-edition","title":"BBCG.19.D365.5.PDF: Configuring Asset Management within Dynamics 365 ERP (Fifth Edition)","description":"\u003cp class=\"MsoNormal\"\u003eDeep in the Dock Ward distillery, an alembic tower rises three stories from furnace base to condensation coil, its copper surfaces etched with arcane runes that channel elemental heat through a precisely calibrated sequence of heating, condensing, and collecting. When the condensation coil fouls or an elemental furnace drifts out of alignment, the entire distillation line halts, and every hour of downtime costs the Waterdeep Trading Company lost production, spoiled ingredients, and unmet contracts. The Asset Management module in Dynamics 365 Supply Chain Management is where these physical assets are classified, located, maintained, and connected to the financial records that track their cost and performance across the company's facilities and trade routes.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAsset Management provides a comprehensive framework that spans the full lifecycle of physical assets, from the moment a piece of equipment is registered to the day it is scrapped. It covers the type classifications that define how assets behave, the functional location hierarchies that map the plant floor from site down to individual equipment positions, the service levels that set response time expectations based on operational criticality, the individual asset records that carry parent-child relationships and operational history, the maintenance requests that capture reported breakdowns for triage, the work orders that direct repair activities through approval and scheduling, the fault management tools that build a diagnostic knowledge base of symptoms, causes, and remedies, the project integration that ensures every maintenance cost flows to the correct financial ledger, the standardized job definitions that bring consistency to maintenance procedures, and the worker group configurations that assign blacksmiths, brewers, mages, and mechanics to the right teams. Greta Ironfist expects every piece of equipment to be tracked from installation to retirement, every maintenance event to be documented with root cause analysis, and every repair cost to be posted against the correct project. These labs deliver that level of governance.\u003c\/p\u003e\n\u003cp class=\"GuideSubheading\"\u003e\u003cstrong\u003eWhat You Will Learn in This Guide\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eAsset Types: \u003c\/strong\u003eDefine the lifecycle states that control how assets progress from creation through active use to eventual retirement, configure the lifecycle models that govern the allowed transitions between those states, and create the asset type classifications that group equipment by function. For the Waterdeep Trading Company, nineteen asset types cover every component of the distillation line, from the alembic tower itself down to individual vent hoods and condensation coils.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eFunctional Locations:  \u003c\/strong\u003eMap the physical hierarchy of places where assets are installed and maintained. This module covers functional location lifecycle states and models, the location types that classify each level of the hierarchy, and the creation of the location records themselves. The Waterdeep Trading Company's hierarchy flows from the Dock Ward production plant through the distillery area and distillation line down to individual equipment positions, with a parallel branch for the maintenance storeroom.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eService Levels:  \u003c\/strong\u003eEstablish the priority framework that determines how quickly maintenance responds to issues at different locations and on different equipment types. Service levels define a numeric scale from critical to low, each with a response window measured in days. Asset service level assignments then map those priorities to specific functional locations and asset types, ensuring that distillation equipment receives same-day attention while routine items follow a longer cycle.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eAssets:  \u003c\/strong\u003e\u003cspan style=\"font-size: 1.0pt; mso-bidi-font-size: 11.0pt; color: white; display: none; mso-hide: all;\"\u003e\u003c\/span\u003eCreate the individual equipment records that represent every maintainable item the organization owns. This module covers the creation of the sixteen assets at the Dock Ward facility, organized in a parent-child hierarchy with the alembic tower at the root, six first-level components, five second-level sub-assemblies, and two standalone cauldrons in the maintenance storeroom. Each asset is classified by type and installed at a functional location.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eMaintenance Requests:  \u003c\/strong\u003eConfigure the lifecycle states, lifecycle models, and request types that govern how reported issues are captured, routed through review and approval, and ultimately closed. The maintenance request workflow supports direct approval for urgent breakdowns and a formal review path for standard requests, ensuring that nothing falls through the cracks between the shop floor and the maintenance team.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eWork Orders:  \u003c\/strong\u003eDefine the lifecycle states, lifecycle models, and work order types that direct the execution of maintenance activities. The work order workflow moves through eight states from creation through approval, scheduling, release, execution, completion, and final sign-off. Six work order types classify maintenance activities as corrective, preventive, safety, investment, round, or general maintenance, each linked to the same lifecycle model.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eFaults:  \u003c\/strong\u003eBuild a structured diagnostic taxonomy by configuring fault areas that identify equipment zones, fault symptoms that describe observable problems, fault causes that capture root reasons, and fault remedies that record corrective actions. The Fault Designer then links these dimensions to specific asset types, creating the valid classification combinations that maintenance workers select when reporting faults. For the Waterdeep Trading Company, five fault areas and eighteen symptoms cover the range of issues encountered on distillation equipment.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eProjects:  \u003c\/strong\u003eConnect asset maintenance activities to project accounting by configuring the shared categories, category groups, project categories, and project groups that control how maintenance costs are posted and reported. Three parent projects serve as containers for automatically generated work order subprojects: one each for preventive maintenance, corrective maintenance, and investment activities. This integration ensures that every hour, material, and fee associated with a work order flows to the correct financial record.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eJobs:  \u003c\/strong\u003e\u003cspan style=\"font-size: 1.0pt; mso-bidi-font-size: 11.0pt; color: white; display: none; mso-hide: all;\"\u003e\u003c\/span\u003eDefine the standardized maintenance job framework through job type categories that classify work as corrective, preventive, condition assessment, or service. Maintenance job trades identify the skilled disciplines required, from blacksmiths and brewers to mages and millwrights. Job type variants add scheduling frequency dimensions, supporting weekly, monthly, and annual maintenance cycles that drive preventive maintenance planning.\u003c\/p\u003e\n\u003cp class=\"GuideSubheadingItem\"\u003e\u003cstrong\u003eWorkers:  \u003c\/strong\u003eOrganize the maintenance workforce into five worker groups by trade, from Blacksmiths and Brewers to Mages, Mechanics, and Millwrights. Assign individual workers to their groups, enabling the dispatch board and scheduling engine to match the right skills to the right work orders. This final configuration step connects the human resources needed to execute the maintenance plans defined throughout the preceding modules.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eBy completing these labs, we will have established a comprehensive asset management framework for the Waterdeep Trading Company, ensuring that every piece of equipment in the Dock Ward distillery is classified by type, installed at its designated functional location, prioritized by service level, tracked through maintenance requests and work orders, diagnosed with a structured fault taxonomy, costed through project accounting, maintained by standardized job procedures, and serviced by skilled workers assigned to the right teams. From the elemental furnace at the base of the alembic tower to the vent hood at its crown, every asset will be governed with the precision that Greta Ironfist demands.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eAdvanced Dungeons \u0026amp; Dynamics 365 Bare Bones Configuration Guides\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eGuide:\u003c\/strong\u003e\u003cspan\u003e  Configuring Asset Management within Dynamics 365 Finance\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003eDigital: \u003c\/b\u003e164 pages\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eEdition: \u003c\/strong\u003eFifth\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003ePublisher:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eBlind Squirrel Publishing (March 2026)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003eLanguage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eEnglish\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003eProduct Dimensions: \u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e8.5 x 11 inches\u003c\/div\u003e","brand":"Blind Squirrel Publishing","offers":[{"title":"Default Title","offer_id":47190023438514,"sku":"BBCG.19.D365.5.PDF","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/3601\/files\/BBCG.19.D365.5AssetManagement_Page_001.png?v=1773753229"}],"url":"https:\/\/www.blindsquirrelpublishing.com\/collections\/bbcg-19-d365-configuring-asset-management\/series_bare-bones-configuration-guides.oembed","provider":"Blind Squirrel Publishing","version":"1.0","type":"link"}